We use cookies (ours and those of third-party providers, e.g. Google Analytics) to simplify the use of our web pages and adjust the content more closely to your interests. Simply continuing to use our web pages sets only those cookies that are required for technical reasons; acceptance means that all cookies (including marketing cookies) will be set. Your consent is voluntary, and can be withdrawn at any time with future effect.

For further information, see our data protection statement.

Accept

XERION 5000-4000.

4x4 high-horsepower tractors from CLAAS.

A 4x4 high-horsepower tractor that is not simply powerful, and it's also not intended simply for pulling one thing in particular – in fact, it's the machine for almost any application, flexible and manoeuvrable, and rising to the most formidable of challenges. The XERION 5000 / 4500 / 4000 successfully combines power and intelligence.

XERION 5000-4000.

4x4 high-horsepower tractors from CLAAS.

A 4x4 high-horsepower tractor that is not simply powerful, and it's also not intended simply for pulling one thing in particular – in fact, it's the machine for almost any application, flexible and manoeuvrable, and rising to the most formidable of challenges. The XERION 5000 / 4500 / 4000 successfully combines power and intelligence.

Absolutely quick. The hydraulics.

XERION 5000-4000

Front

The XERION is equipped with two hydraulic circuits:

The primary circuit operates the linkages and spool valves, while the secondary circuit operates the oil cooler as well as the steering system and brakes. Timing and volume control are infinitely variable via CEBIS on all spool valves.

  • 200 bar operating pressure at 205 l/min
  • Flow rate max. 105 l/min per spool valve
  • 120 litre tank capacity
  • 80 litres drawable oil volume
  • 61 kW max hydraulic output
XERION 5000-4000

Rear

Between three and six spool valves (max. seven spool valves without rear linkage) are available at the rear. The XERION can be equipped with two spool valves at the front. Three spool valves are available if a front linkage is not installed.

XERION 5000-4000

Optional power hydraulics.

The XERION can be optionally equipped with a third hydraulic circuit. This power hydraulic system serves as the basis for further applications.

When used with a gooseneck slurry tanker, this represents a fuel-saving alternative to PTO operation.

  • Max. 260 bar operating pressure
  • Max. 235 l/min oil flow
  • Max. 90 kW output
  • Ease of operation via toggle switches and ISO terminal